A fabricated a dimple die set out of mild steel. Hole in the center is to use a bolt to draw the two halves together. Usually I just clamp them in a vise.
1/2″, 3/4″, 1″, 1-1/4″, and 1-1/2″
A fabricated a dimple die set out of mild steel. Hole in the center is to use a bolt to draw the two halves together. Usually I just clamp them in a vise.
1/2″, 3/4″, 1″, 1-1/4″, and 1-1/2″